Alfa Romeo Mito

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Car Audio Stereo Installation kit for installing a new after market double din headunit into your Alfa Romeo Mito. This is complete kit including Fascia Trim Panel, Cage, Infodapter, Aerial Adaptors and keys to remove your old stereo.Package IncludesDouble Din Fascia (Matt Black) Double..

For Fiat and Abarth, Alfa Romeo, Chrysler, Citroen, Lancia, Peugeot cars that do not have an ignition power supply in the factory harness. This cable includes the power and speaker supply and provides an ignition supply from the cars CAN bus data system when the key is in the accessory position. ..

USB interface that plugs directly into the back of your factory car stereo and allows you to connect any mass storage USB  portable audio device e.g. USB hard drive, iPOD, Minidisk, MP3 Player, PS2 or even your laptop.The interface offers MP3 folder and track control along with USB power to..

The ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the speakers. The SOT leads a..

Package IncludesPioneer 16.5cm 3-Way Coaxial 320W Car Speakers (Sold As Pair) 165mm Front Door Speaker AdaptorIt Just Got Easier to Upgrade your Genuine OEM Sound.Upgrade the original sound system of your car. Our A series line up can give you the easy to install sound upgrade sol..

ZDSKFO1 Speaker KitThe ZDSKFO1 speaker kit is designed to provide a simple and effective upgrade to your vehicle’s sound system. The ZDSKFO1 speaker kit comes with vehicle-specific connectors, ensuring a seamless installation process while significantly improving the audio quality.The ..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This camera fits in place of the original rear number plate light.Reverse view camera for Renault Trafic, Vauxhall Vivaro, Nissan Primastar vans as well as some Fiat and Alfa Romeo cars.{ vehicle_compatibility }Camera Features:NTSC RCA video Wide 170° viewing angle Super..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

CANbus steering wheel control interface for Fiat/ Alfa Romeo, Citroen, Lancia, Peugeot, Vauxhall vehicles with the larger-style connector behind the radio.This interface uses a larger style connection behind the original radio to allow the use of the original steering wheel control buttons with ..

Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. These ne..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Car Audio Stereo Installation kit for installing a new after market single din headunit into your Alfa Romeo. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, Aerial Adaptor and keys to remove your old stereo. Package Includ..

Car radio fascia adapter panel to allow the fitting of an aftermarket double DIN car radio upgrade for Alfa Romeo Mito cars (2009 onwards)The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.Important F..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

CANbus steering wheel control interface for Abarth, Alfa Romeo, Chrysler, Citroen, Fiat, Ford, Iveco, Lancia, Peugeot & Vauxhall vehicles with older style ISO connections.This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus o..