Nissan Navara

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Package Includes:JL Audio C1-650x 6.5" 16.5cm 2 Way Yellow Cone Car Speakers 165mm Speaker Adaptor Panels Speaker Adaptor Cables Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit{ vehicle_compatibility }C1-650xCoaxial Speaker System: 6.5-inch ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Grey rectangle female antenna connector to male DIN car aerial antenna adapter cable.This cable adapts from the grey plastic rectangle antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket radio.This is a passive antenna adapte..

Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector. ..

Nissan - DIN Antenna Adaptor. *For Aftermarket Radio With DIN Antenna Connector*Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adapt..

CAM-NS1-RT Nissan​ Reverse Camera Retention InterfaceThe CAM-NS1-RT is a reversing camera retention lead specially designed for use on various Nissan models (For specific models please view Vehicle Applications). This easy to install plug and play system allows users to retain the use of th..

Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 10 and 6 pin Nissan connectors to standard aftermarket ISO connectors.This cable includes the power and speaker supply. If the car has steering wheel controls then use item 29..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 148.5 mm Ring outside: 166 / 181.5 mm ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

24 Way connector and voltage adapter to keep the use of the original fitted reverse camera with an aftermarket head unit.NOT SUITABLE FOR BIRDS EYE 360 camera system Connect the purple wire to the new head-units 12V reverse signal wire, black to ground. The interface drops the volta..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Package Includes165mm Front Or Rear Door Speaker Adaptor Rings/Panels Speaker Adaptor Plugs Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Speaker Adaptor Plugs. Converts OEM Plugs To Standard Af..

Nissan (2006 Onwards) Handsfree SOT cable to ISO Mute harness This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play through t..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Package IncludesSTINGER IE268E 6.8" Screen Wireless Apple Carplay / Android Auto, Bluetooth, DAB+ Stereo DAB Aerial Double Din Fascia (Matt Black) Steering Control Interface Nissan Grey Rectangle to DIN Antenna Adaptor Cable Stereo Patch Lead{ vehicle_compatibility }..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Provide a full sound upgrade to your Renault front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Renault vehicles including. Please see our compatibility list for more cars that can benefit from this upgrade kit.  This speaker upgrade kit of..