Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. BMW 17 pin round pin steering wheel control interface.Some cars may have the Wave Casette head unit and the harman/kardon amplified audio system. If the cars has this set up and a quadlock con..
OEM USB Retention Adapter CableBMW 1-Series (E81) 3-Series (E90/E91/E92/E93) 5-Series (E60) X1(E84) and Mini (R56) OEM USB retention adapter cable Allows retention of the original USB port socket in the car when fitting an after market radio.Fits select BMW cars built from 2003 to 2..
MOST Fibre optic interface to allow the fitting of a new head unit into a BMW with the TOP HI FI SYSTEM (Logic 7/ Harman Kardon) original audio and retain the use of the fibre optic amplifier. You will lose front to rear fading ability.if the car has speaker wiring in the Quadlock ..
Female ISO to Male DIN antenna adapter cableThis cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers.Aerial AdaptorAn Aerial Adaptor is needed when replacing the origi..
Fakra Male to Female Extension 5m5 meter male to female Fakra antenna cable extension. With water blue universal Fakra cable.Used to extend the fakra connector when fitted at the rear of a car..
For BMW cars built before 2002 with 17 pin Round connector and HARMON KARDON amplifier upgrade.Retains the use of the amplified audio system, including subwoofer.This cable has phono cable plugs for low level pre-out connection to the new car radio.
This cable has a 12volt turn on wire. It ..
BMW Quadlock to ISO connectors for connecting a car to an aftermarket car radio.
This harness is for cars without Steering wheel controls and for cars that have a12v ignition supply included in the Quadlock connector.For cars with steering wheel controls please use 29-628Harness Adaptor..
BMW, Land Rover, Mini Quadlock to ISO T cable for cars 2005 onwards without Ignition supply in the radio connector. This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit.This cable fits behind the car radio and is used as a break-out cable to enable the ..
17 pin BMW ISO hands-free T harness . Also fits Rover and Land Rover, Mini models made with BMW wiring connectors For use with Handsfree car kits that have ISO Mute cables.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play thro..
Quadlock 24 Way Extension Cable24 way micro connector extension cable for Quadlock SOT leadsThis cable is for extending the 24 small micro terminals used in the "quadlock" audio connector in some European cars like BMW, VW, Peugeot and Citroen.
Eg. use this cable to convert our st..
Adaptation Cable for the IMPULSE 4.320 Compact 4-channel Digital AmplifierThe Focal Inside BMW/MINI Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the BMW/MINI original head unit and of ..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.Please check connection before ordering, this item is only for Round Pin connection type.&n..
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.Please check connection before ordering, this item is only for Round Pin connection type.&n..
Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Experience superior sound quality in your car with our car speaker adapter - the ultimate aftermarket upgrade solution. Designed to fit 3” speakers, these speaker..
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
BMW ISO T-HarnessThe ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to th..
Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W
InCarTec Quadlock ISO Mute SOT Cable{ vehicle_compatibility }Compact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might just ..