{
"schema_version": 1,
"id": 38238,
"name": "Opel Movano Cargo CAN-Bus Steering Wheel Control i-dapter - 43-100",
"url": "https://www.dynamicsounds.co.uk/opel-movano-cargo-can-bus-steering-wheel-control-i-dapter-43-100.html",
"brand": "ACV",
"model": "43-100",
"sku": "43-100",
"gtin": "7427288193119",
"mpn": "",
"identifiers": {
"model": "43-100",
"sku": "43-100",
"ean": "7427288193119"
},
"description": "The i-dapter CAN-bus steering wheel control adapter is designed for vehicles with compatible factory radio systems. It allows the original OEM radio or navigation system to be replaced with an aftermarket head unit while retaining several important vehicle display and control functions.\nVehicle-specific settings are accessible and displayed through the aftermarket head unit, helping keep the vehicle’s original menu functions available after the stereo upgrade. Steering wheel control buttons are also supported, including vehicles with steering wheel controls and voice dial buttons where compatible.\n{ vehicle_compatibility }\nWhat does this i-dapter interface do?\nThis i-dapter will retain several vehicle display functions when the OEM radio or navigation system is replaced with an aftermarket head unit. Vehicle-specific settings are accessible and displayed on the aftermarket stereo, helping retain important factory menu functions after installation.\nSteering wheel control buttons are also supported, including compatible vehicles with steering wheel controls and voice dial buttons.\nWhich functions does this adapter retain?\nRetains steering wheel control functionality\nAllows replacement of the factory radio or navigation system\nMaintains access to vehicle settings through on-screen menus\nSupports OEM rear view camera input where compatible\nProvides outputs for ignition feed 12V, illumination, reverse, speed pulse and park brake\nSupports English, German, Spanish, Italian and French\nSoftware updateable via USB A extension interface\nWhich OEM head units are supported?\nThis interface is suitable for selected vehicles with the following OEM head units, depending on vehicle application, wiring and software:\nContinental 250VP1 OEM head unit\nContinental 250VP2 OEM head unit\nUConnect OEM head unit\nContinental Mopar OEM unit\nDaiichi OEM head unit\nWhat connectors does this interface use?\nVehicle connector: 52 Pin Fiat\nOEM steering wheel control output: 3.5mm jack / loose wire\nOEM rear view camera output: yellow RCA male\nSoftware update interface: USB A extension\nSystem type: CAN Bus\nWhat signal outputs are provided?\nRed: ignition feed 12V / clamp 15\nOrange: illumination 12V / clamp 58\nPurple/white: 12V reverse gear signal\nPink: speed pulse signal\nGreen: GND park brake signal\nOutput load capacity is 250 mA maximum.\nFor current requirements over 250 mA, use relay isolation. One relay requires a coil resistance of 75 Ohm minimum. Two relays require a coil resistance of 150 Ohm minimum.\nDoes this adapter support the OEM rear view camera?\nThis adapter supports the OEM rear view camera input where compatible. The rear view camera input must be activated and configured in the aftermarket head unit.\nPurple/white: 12V reverse gear signal\nOchre RCA male: rear view camera input to aftermarket head unit\nThe i-dapter settings and visualisation are shown through the aftermarket head unit’s rear view camera input.\nIf the camera image, i-dapter settings or visualisation are not available, connect an additional GND signal to the RCA outer conductor of the camera and head unit connection.\nOEM rear view camera wiring information\nFor vehicles with an OEM rear view camera connector:\nRed: Pin 31 Video +\nWhite: Pin 32 Video -\nBlack: Pin 33 Shield\nHow do you access the i-dapter settings?\nTo access the i-dapter settings, press and hold the track up or track down steering wheel control button.\nDIP switch settings must be made without the power connection. Reconnect the interface once the settings have been made.\nPlease refer to the manual for DIP switch settings for the OEM device and the retrofit head unit manufacturer.\nAre all vehicle functions retained?\nNot all vehicle functions are supported on every vehicle. Function retention depends on vehicle equipment, factory software, aftermarket head unit software and the range of functions supported by the retrofit stereo.\nNot all vehicle settings are supported\nNot all vehicle functions are supported\nNot all vehicle information is visualised\nHigh beam assistance is not supported\nDriver assistance system is not supported\nStart/stop function is not adjustable\nTrailer Assist, E-Call and other driver assistance or comfort systems may not be supported.\nWhat should be checked before installation?\nCheck the vehicle menu for available settings before installation\nCheck the function of vehicle settings and vehicle systems before final installation\nCompare the listed OEM head units with the vehicle’s factory radio\nCompare the pictured harness connectors with the connectors in the vehicle\nMake sure the connectors match visually and technically\nCheck the installation recommendations for each component\nReimported vehicles or vehicles with different software may be incompatible with some functions.\nWhat's Included\n43-100 Steering Control Adaptor\nStereo Patch Lead\nPatch lead INCLUDED for the steering controls depending on the make of radio being fitted.\nYou have a choice from the following patch leads\nAlpine\nClarion\nJVC\nKenwood\nPioneer\nSony\nChina Units\nTECHNICAL NOTE:\nCAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.\nSOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.\nIMPORTANT NOTE\nChina Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.\nPlease make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.\nWe try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.",
"category": [
"Fitting Accessories",
"Steering Wheel Interfaces",
"Opel"
],
"tags": [
"Movano",
"C",
"Movano",
"C"
],
"images": [
"https://www.dynamicsounds.co.uk/image/catalog/products/In-car-tec/43-100/43-100.jpg",
"https://www.dynamicsounds.co.uk/image/catalog/products/In-car-tec/43-100/43-100-1.jpg",
"https://www.dynamicsounds.co.uk/image/catalog/products/In-car-tec/43-100/43-100-2.jpg",
"https://www.dynamicsounds.co.uk/image/catalog/products/In-car-tec/43-100/43-100-3.jpg",
"https://www.dynamicsounds.co.uk/image/catalog/products/In-car-tec/43-100/43-100-4.jpg"
],
"price": {
"currency": "GBP",
"amount": 199.99,
"regular": 199.99,
"on_sale": false,
"sale_ends": null,
"includes_tax": true
},
"quantity_discounts": [],
"availability": {
"in_stock": true,
"status": "in_stock",
"stock_status": "",
"minimum_quantity": 1
},
"attributes": [],
"options": [
{
"name": "Addons",
"type": "checkbox",
"required": false,
"values": [
{
"name": "Dashboard Trim Tool Panel (4 Pack Assorted)",
"price_adjustment": 7.99,
"in_stock": true
},
{
"name": "Dashboard Door Panel Trim Removal Tool Kit (5 Pcs)",
"price_adjustment": 12.99,
"in_stock": true
},
{
"name": "Dashboard / Door Trim Removal &  Precision Hook Set (9 Pcs)",
"price_adjustment": 19.99,
"in_stock": true
},
{
"name": "DC 5V-90V Voltage Circuit Tester Digital Display",
"price_adjustment": 14.99,
"in_stock": true
}
]
}
],
"dimensions": null,
"weight": {
"value": 1,
"unit": "kg"
},
"rating": null,
"reviews": [],
"shipping": {
"country": "GB",
"rate": 0,
"currency": "GBP",
"free": true,
"handling_days": {
"min": 0,
"max": 1
},
"transit_days": {
"min": 2,
"max": 5
}
},
"returns": {
"accepted": true,
"window_days": 14,
"unlimited": false,
"fees": "customer",
"country": "GB",
"policy_url": null
},
"warranty": "1 Year Warranty on all items",
"updated": "2026-10-22T14:49:24+00:00",
"store": {
"name": "Dynamic Sounds Ltd.",
"url": "https://www.dynamicsounds.co.uk/",
"currency": "GBP"
},
"vehicle_compatibility": {
"header": "The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years. Vehicles with UConnect / Continental Mopar OEM unit Vehicles with 7" OEM head unit Vehicles with Continental/Mopar 250VP1 / 250VP2 OEM head unit Vehicles with Daiichi OEM head unit wiring harness with black cables: adapter wiring harness may need to be dismantled at the radio slot on the driver’s side Vehicles with Daiichi OEM head unit wiring harness with coloured cables are not compatible",
"count": 2,
"vehicles": [
{
"make": "Opel",
"model": "Movano",
"years": {
"from": 2021,
"to": 2024,
"text": "2021 - 2024"
},
"product_type": "Steering Wheel Interfaces",
"notes": "Cargo C (Y)",
"variants": [
{
"name": "C",
"years": {
"from": 2021,
"to": null
}
}
]
},
{
"make": "Opel",
"model": "Movano",
"years": {
"from": 2021,
"to": 2024,
"text": "2021 - 2024"
},
"product_type": "Steering Wheel Interfaces",
"notes": "Electric Cargo C (Y)",
"variants": [
{
"name": "C",
"years": {
"from": 2021,
"to": null
}
}
]
}
],
"product_type_description": "0"
}
}