Ultra Compact Mono Amplifier

The FDS 1.350 is a mono block amplifier specifically designed for handling a subwoofer channel. It has a power of 210 and 350 Watts RMS under 4 and 2 Ohms respectively. In order to configure the system’s bass according to the car’s installation; it is equipped with an active crossover, bass correction and phase adjustment.

• Mono D Class amplifier with dual output
• RCA low-level inputs
• Compact

Key Points

• D Class – Direct Fet ® Technology - Efficient heat dissipation and precision
• Stable under 2 Ohms
• Stackable aluminium chassis with high heat dissipation
• Low noise operational amplifiers New Japan Radio® NJM4580
• Low ESR capacitors - 105°C (220°F)
• Pseudo-balanced inputs

Features

• Mono D Class amplifier with dual output
• CEA power (4 Ohms): 1x210 Watts RMS
• Power max (2 Ohms): 1x350 Watts RMS
• Low-pass crossover: 40Hz-400Hz
• Progressive phase adjustment (0-180°)
• Bass boost (0/6dB/12dB)
• Protections: Short circuit / low impedance / Polarity
• reversal / DC / power drop / heat protection
• Dimensions (LxHxW):
• 713/16x41/4x111/16 (199x108x43mm)
• Weight: 1.9 lbs

Audio Specifications

• CEA Power (4 Ohms) 1x210 Watts RMS
• Maximum power (2 Ohms) 1x350 Watts RMS
• Minimum Impedance Single output
• configuration
• 2 Ohms
• Minimum Impedance Dual output
• configuration
• 4 Ohms
• Bandwidth (-3dB) 10Hz – 400Hz
• THD 0,05 %

General Features

• Low level input sensitivity 0.2V - 5V
• Crossover Low Pass 40Hz - 400Hz
• Bass boost
  • 50Hz centered –
  • selective
  • (0dB/6dB/12dB)
• Phase adjustment Linear (0 – 180°)
• Standby consumption (ON) /
• Consumption OFF
• 0,7A / 0A
• Protections
  • Short-circuit / Low
  • impedance / Polarity
  • reversal / DC /
  • Low tension / Thermal
  • overload
• Weight Lbs / g 1.9 / 850
• Dimensions (L x l x h)
• Inches / mm
• 713/16x41/4x111/16
• (199x108x43mm)