Product Compatibility Chart
|BMW||Z4||2002 - 2008||E85/86 Models|
Your new stereo does not require the cage and outer trim supplied with the stereo. Mount the left and right brackets supplied in the kit to the stereo. Mount to dash and the main fascia supplied fits over the front of the stereo. The stereo does not fit through the front of the fascia.
Connection: Quadlock (Fakra)
Car Audio Stereo Installation kit for installing a new after market Single din headunit into your BMW. This is complete kit including Fascia Trim Panel, Wiring Harness, and Aerial Adaptor.
- Fascia Trim Panel Adaptor
- Wiring Harness Adaptor
- Aerial Adaptor
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
The wiring harness will allow to install the stereo. This adapter is required when replacing your factory fitted radio with an aftermarket radio. It will convert the original vehicle power & speaker wiring connectors to a standard ISO connector. Simply plug one end of the adapter into your cars wiring harness and the other into your new radio.
Please Note: You will need to connect the red wire to the ignition supply in the fuse box.
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.