Product Compatibility Chart
|Audi||A6||2001 - 2004||Symphony OEM Radio|
Depending on year some Audi may require a ignition live run from fuse box to stereo ignition live input.
With BOSE AMPLIFIED SPEAKER SYSTEM (Retains amplifier)
Double Din Car Audio Stereo Installation kit for installing a new after market headunit into your Audi. This is complete kit including Fascia Trim Panel, Wiring Harness, Aerial Adaptor and keys to remove your old stereo.
- Double Din Fascia Panel
- Wiring Harness (Full Bose)
- Aerial Adaptors
- Stereo Removal Keys
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
The wiring harness will allow to install the stereo without having to cut any wires.
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
Stereo Removal Keys
Stereo Removal Keys to remove headunit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units you will require a manufacturer specific stereo removal key to prevent damage to the head unit or the surrounding fascia and cage.
Important Fascia Notes
- China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
- We do not take any responsibility for China units not fitting as they are not industry standard size.
- If the cage supplied with the stereo does not fit the fascia then you must purchase a universal cage which is slightly smaller.
- Click here for CT23UN01 UNIVERSAL Mounting Cage
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.