Compatible with following vehicles:
|Car Make / Model||Year||Remarks|
|Volkswagen Caddy||2004 onwards|
|Volkswagen EOS||2006 onwards|
|Volkswagen Golf V||2003 onwards|
|Volkswagen Golf Plus||2005 onwards|
|Volkswagen Jetta||2006 onwards|
|Volkswagen Passat||2005 onwards|
|Volkswagen Polo||2005 - 2009||Only suitable with Dashboard in Picture below|
|Volkswagen Touran||2003 onwards|
|Volkswagen Transporter||2010 Onwards||T5.1|
Note: To use as a double din fascia the middle bar needs to be cut.
For Polo the dashboard should look like this
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
The wiring harness will allow to install the stereo.
Please Note: You will need to connect the red wire to the ignition supply in the fuse box.
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
The blue wire is connected to the back of the car stereo where there is a blue wire thats says antenna remote out or ant remote out.
IMPORTANT NOTE: Please make sure that is the correct Wiring & Aerial for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service on 020 8875 2525 and we will be happy to help you.