Bass Pack Contents:

• 1 x Pioneer TS-W3002D4 12 inch Champion Series Pro, 30cm, 3500W Car Audio Subwoofer
• 1 x Alpine MRX-M100 -  X-Power Amplifiers 1 Channel Class D Mono Amplifier
• 1 x Alpine RS12V - 18mm MDF Subwoofer Bass Box
  
• 1 x Connects2 CT35-4AWG - Complete 4 AWG Amplifier Wiring Kit 1600W

Pioneer TS-W3002D4 Features:

• Maximum output power: 3500 Watt
• Nominal output power: 1.000 Watt
• Impedance: Dual 4Ω
• Frequency response: 20 - 150 Hz
• Lowest resonance frequency (Hz): 31 Hz
• Sensitivity (1W/1m): 90 dB
• Woofer size (cm): 30 cm
• Woofer material: Interlaced Basalt / Carbon Fibre Reinforced IMPP™
• Dual 4Ω voice coils: 2 or 8Ω
• Voice Coil bobbin type: Phenol resin coated glass cloth bobbin
• Pole Yoke Type: Extended and Vented pole yoke
• Magnets: Double-stacked, high power
• Terminals: Push-type
• Recommended sealed enclosure (Litres): 14,2 - 28,3 litres
• Surround: 3-Layer Fiber Woven Radial Surround

• Terminal Layout: Two-Sided
• Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

• Amplifier Type: Class-D (Digital)
• Channel Design: 1 Channel (Mono)
• Thermal Control: Thermal Management Control
• Power Supply: MOSFET
• Power Supply Design: DC-DC PWM Power Supply
• Board Circuitry: S.T.A.R. Circuitry
• Current Protection: Over-Current, Over-Voltage and Thermal Protection
• Power Indicator: Top Mounted Blue LED Power Indicator
• Speaker Level Inputs
• Stereo PreOuts
• Crossover: Variable Lowpass Filter
• Built-in Bass EQ
• Built-in Subsonic Filter
• Final Outputs: Direct FET
• Board Design: 6-layer Glass Epoxy PC Board
• Gain Control: Continuously Adjustable Gain Control
• Bass Control: Remote Bass Control ( RUX-KNOB sold separately )

• Max Power: 1900W

• Per Channel into 4ohms, 14.4V (≤1%THD+N): 600W
• Per Channel into 2ohms, 14.4V (≤1%THD+N): 1000W

• Crossover Frequency (LPF): 50 - 400Hz (-12dB/oct.)
• EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB
• Subsonic: OFF, 5 - 30Hz (-24dB/oct.)

• Heat Sink: 280x 58 x 230 mm
• Footprint: 340 x 58 x 230 mm

• Power Requirements: 14.4V DC (11 - 16V)
• Input Sensitivity (RCA Input): 0.2 - 4.0V
• Input Sensitivity (Speaker Level Input): 0.5 - 10V
• Input Impedance:10k ohms
• Frequency Response (+0, -3dB: 1W into 4 ohms): 5 - 400Hz
• Frequency Response (+0, -1dB: 1W into 4 ohms): 10 - 300Hz
• THD+N (10W into 4 ohms):0.004%
• THD+N (Rated Power into 4 ohms):0.04%
• Damping Factor: >1000
• Signal to Noise (Rated Power into 4 ohms): 117dB
• Preamp Output: 4V max.
• Remote Level: 0 to -20dB ( RUX-KNOB Required )
• Weight: 3.8kg

• Width: 405mm
• Depth Bottom: 420mm
• Depth Top: 330mm
• Height: 380mm

• Constructed from 18mm (3/4") MDF
• Terminal Cups with Gold Plated Binding Posts
• Wired internally ready for subwoofer
• Charcoal Grey Carpet finish

Connects2 CT35-4AWG Includes:

• 1 x Transparent red 4 awg power cable 17 Feet (5 meters)
• 1 x Transparent black 4 awg ground cable 3 feet (1 meter)
• 1 x Transparent speaker cable 25 feet (7.6 meters)
• 1 x Transparent blue 18 awg signal (remote turn on) cable 16 feet (4.8 meters)
• 1 x Dark Blue RCA Cable 17 feet (5 meters)
• 1 x Split conduluted casing (black) 6 feet (1.8 meters)
• 1 x AGU Fuse Holder & Fuse (60 Amp)
• 2 x 4awg ring terminal
• 1 x 14-16 awg spade terminals
• 4 x 0.25" female disconnectors
• 10 x 6" cable ties