Bass Pack Contents:

• Alpine SWX-1243D - 12" (30cm) Subwoofer 3000W
• Alpine PDX-M6 - Class D Mono Power Density Car Audio Digital Amplifier
• Connects2 CT35-4AWG - Complete 4 AWG Amplifier Wiring Kit

• Designed and Engineered in USA
• Fixing holes hidden by the seal
• Jumper with gold terminals for easy connection
• Terminals on one side
• Large Strontium magnet in
• Multi Roll with High excursion Santoprene
• Optimized Nomex ® Spider
• T-Drive motor structure with heat transfer system
• Multi-Stage Ventilation System
• Integrated Spider Landing and Heat Transfer Plate
• Dual Coil Design, 4 layers, management of temperatures up to 220 °
• Basket with aluminum elements
• Cone Made of Carbon Fiber & Aluminum

• Maximum power of 3000 W
• RMS Power 1000 W
• Impedance: 4 + 4 Ohm
• Sensitivity 86dB / W (1m)
• Frequency Response: 20-500Hz
• Mounting depth: 221 mm
• Installation Diameter: 277mm

Alpine PDX-M6 General:

• Amplifier Type: Class-D (Digital)
• Channel Design: 1 Channel (Mono)
• Thermal Protection
• Low-battery Protection
• Power Supply: Resonant Mode Power Supply
• Power Supply Design: DC-DC PWM Power Supply
• Board Circuitry: STAR Circuit
• Current Protection: Auto Over-Current Protection
• Power Indicator: Top Mounted Blue LED Power/Status Indicator
• RCA Output: Non-Fading Pre-Amp Output
• Crossover: Adjustable Low Pass
• Pre-Amp Stage: Discrete
• Final Outputs: MOSFET
• Board Design: 6-Layer Glass Epoxy PC Board
• Gain Control: Adjustable
• Bass Control: Remote Bass Control (Sold Separately)

Alpine PDX-M6 RMS Power Ratings:

• Per channel into 4 Ohms: (@14.4V ≤1%THD+N) 600W x 1
• Per channel into 2 Ohms: (@14.4V ≤1%THD+N) 600W x 1

Alpine PDX-M6 Sound Tuning:

• Crossover: Variable, 50-400Hz (-24dB / oct ), (Variable, L.P.F Only, 1/2 ch)
• Subsonic Filter: OFF / 15Hz / 30Hz

Alpine PDX-M6 Dimensions:

• Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm

Alpine PDX-M6 General:

• Power Requirements: 14.4V DC (11V to 16V)
• Input Sensitivity: Select Vol, 0.1V to 1.0V or 1.0V to 8.0V (For Rated Power)
• Cable size: 25 mm² (BATT and GND), 4 mm² (Remote), Up to 10 mm² (Speaker)
• Frequency Response: 5 Hz - 400 kHz / 0dB ~ -3dB (Reference: 1 W into 4 Ω)
• Speaker Impedance: 4 or 2 Ω
• Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4Ω) 95 dBA 

Connects2 CT35-4AWG Specification:

• Power Rating 1600W - 60amp

Connects2 CT35-4AWG Includes:

• 1 x Transparent red 4 awg power cable 17 Feet (5 meters)
• 1 x Transparent black 4 awg ground cable 3 feet (1 meter)
• 1 x Transparent speaker cable 25 feet (7.6 meters)
• 1 x Transparent blue 18 awg signal (remote turn on) cable 16 feet (4.8 meters)
• 1 x Dark Blue RCA Cable 17 feet (5 meters)
• 1 x Split conduluted casing (black) 6 feet (1.8 meters)
• 1 x AGU Fuse Holder & Fuse (60 Amp)
• 2 x 4awg ring terminal
• 1 x 14-16 awg spade terminals
• 4 x 0.25" female disconnectors
• 10 x 6" cable ties